Pool Heat Pumps

For most Australian homes, pool heat pumps are one of the cheapest options over time. They use electricity to pull heat from the air rather than generating it, which keeps running costs low. Many Thermopools customers also pair heat pumps with solar heating to reduce costs even further.

Yes, you can add a pool heat pump to most existing pools. In most cases, it connects directly to your current filtration system. Thermopools installs heat pumps on both new and existing pools, provided the plumbing and power supply are suitable.

On average, a pool heat pump runs between 6 and 10 hours per day. This depends on pool size, outdoor temperature, and how warm you want the water. Running the system during daylight hours usually delivers better results.

The 20-degree rule refers to efficiency. Pool heat pumps perform best when the air temperature is above 20°C. They still work below this temperature, but heating may take longer, especially overnight.

Most pool heat pumps increase water temperature by about 1 to 2 degrees per day. Using a pool cover helps speed things up by preventing heat loss, especially overnight.

For many homeowners, yes. A heated pool means more usable months each year and greater comfort. Thermopools clients often find that the extended swimming season easily justifies the investment.

Compared to gas heaters, pool heat pumps use much less electricity. Because they transfer heat instead of creating it, energy use stays relatively low, especially when paired with proper insulation and a pool cover.

It’s usually better to maintain a steady temperature rather than turning the system on and off. Using a timer allows your heat pump to operate efficiently without running unnecessarily.

A pool heat pump is designed to last for many years when installed correctly and maintained properly. Regular servicing, clean water, and good airflow all play a role in long-term performance.

The main drawback is the upfront cost. Heat pumps usually cost more to install than gas heaters. However, the lower running costs often make them cheaper in the long run.

Daily running costs vary depending on usage and weather, but many Thermopools customers spend only a few dollars per day. Running the system during warmer hours and using a pool cover helps keep costs down. Here’s a blog on whether heat pumps are actually cost-effective or not.

Pool heat pumps should be installed outdoors in a well-ventilated area with good airflow. They are usually placed close to the filtration system on a level surface for best performance.

The correct size depends on pool volume, location, and how warm you want the water. Thermopools recommends a professional assessment to ensure the heat pump matches your pool’s needs. For a rough estimate, you can check out How Do You Select the Right Pool Heat Pump Size?

Thermopools has answered many common questions in detail on their dedicated resource page covering pool heat pump FAQs, including installation, running costs, and performance.